2500
Showing 65–80 of 234 results
-
CJA Motor Two Speed, 10 HP, 1200/400 RPM, Frame 286T, 460VAC/3ph/60HZ3
Add to Quote -
Cutler Hammer Durm Brake75ft/LB, #511H971-8, 440V Coil, 7″ Drum, (Note: Does Not Include Drum)
Add to Quote -
Cutler-Hammer Drum Brake 25 ft/lb #511H993-39 120V, 60Hz (Less Drum)
Add to Quote -
Cutler-Hammer Lining & 511 Shoe for 7 Inch Drum Brake (2 Required)
Add to Quote -
Cutler-Hammer S-5 1/2″ Drum Brake #511H993-41 480V, 1 phase (Less Drum)
Add to Quote -
Delroyd Worm Reducer E40-S8 (10D73969) 2.12 Rated HP Input: 1750 RPM Output: 29.2 RPM Ratio: 60:1
Add to Quote -
Dings Brake #6-83075-33-U3K, 230V, 1-3/8″ Bore
Add to Quote -
Dings Brake #61003-524V1D, End Mount, 240-480VAC, 5/8″ Hub, 1 Disc
Add to Quote -
Dings Brake #63015-524-U1F
Add to Quote -
Dings Brake #64025-524-V1F-H, 240/480V, 1 Phase, Shaft 7/8″
Add to Quote -
Dings Brake #8-63010-67B (replaces #9-63010-29) 230/460V, 7/8″ Hub
Add to Quote -
Dings Brake 4-62010-530-U1F
Add to Quote -
Dings Brake 4-63015-530-U1F : 530 = Cast Cover with Hub Seal (NEMA 4) : U = 230/460, 60 Hertz : 1 = Single Phase : F = 7/8″ Bore
Add to Quote -
Dings Brake 47-71015-103-U3H, 230-460V, 3 Phase, bore 1-1/8″
Add to Quote -
Dings Brake 6-72025-57 (High Useage Elevator Duty) 230/460 Volt/3ph/60 hz (Wired for High Voltage) Bore 1.25″ with 1/4″ x 1/8″ Keyway
Add to Quote -
Dings Brake 63010-524-U1F-HX : 6 = 60 Series : 3 = Three Rotating Discs : 010 = 10 ft. lbs. : 524 = Specification Code: NEMA 2 : U = 230/460 Volts, 60 Hertz : 1 = Single Phase : F = 7/8” Hub Bore (3/16” x 3/32” keyway) : H = Heavy duty rotating discs : X = (2) EXTERNAL WIRE OUTLETS W/(2) PIPE PLUGS
Add to Quote